10/100Base-TX to 100Base-FX Industrial Media Converter - Albany, NY

Friday, 11 September 2015

Item details

City: Albany, New York
Offer type: Sell

Contacts

Contact name Aoa Technology

Item description

The IMC1100 series Industrial Media Converter is designed to extend the distance of a network by converting Fast Ethernet data between twisted pair cabling and multi-mode or single-mode fiber-optic cabling.
The IMC1100 features a 100Base-FX fiber port and a 10/100Base-TX twisted-pair port. The fiber optic port features SC connector and operating distance from 2km to 120km depending on different Model. The twisted-pair port has an RJ-45 connector with a maximum operating distance of 100m.
Many Backbone switch products now support the industry-standard IEEE802.1Q specification for VLANs that send extra-long data packets on the network. The IMC1100 series converters are fully compatible with these long packets, enabling them to be used in modern networks.
The small size and dual external power supply inputs of the IMC1100 series allows them to be used almost anywhere in harsh environmental conditions; wide range of temperature can be -40 ? C ~ +85 ? C; used in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications. Additionally, they can be installed by DIN-Rail or wall-mounted, allowing users to deploy any mix of network conversions required.
Features
UTP to fiber media converter
RJ45 support auto MDI/MDI-X function
Auto-negotiation speed, half/full-duplex
Store-and-forward & Cut-thought working mode optional
Built-in LFP (Link-fault-pass-through) function
Jumbo frame: 9kbytes
Wide-range redundant power design ( 12~56VDC
Support wide operating temperature (-40 ? C ~ +85 ? C
Power polarity reverse protect
Overload current resettable fuse present
IP-40 protection
Provide EFT protection for Power line
Support Ethernet ESD protection
DIN-Rail and Wall-Mounted Installation
Low power consumption
Standards IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x Flow control and back pressure
IEEE802.1d Spanning Tree
IEEE802.1Q VLANs
Performance Processing Type : Store and Forward
MAC Table Size: 1Kbit
Buffer Space: 288Kbit
Time Delay: <150μs
Copper Port Data Rate: 10/100M
Connector: RJ45
Distance: 100m
Fiber Port Data Rate: 155M
Connector: SC as default, FC/ST Optional
Distance: MMF 2km, SMF 20/40/80/100/120km
Bi-di:20/40/80/100/120km
Dip-switch Dip1 ON + Dip2 ON = Modified Cut-through Mode
Dip1 ON + Dip2 Off = Converter Mode
Dip1 Off + Dip2 ON = Cut-through
Dip1 Off + Dip2 off = Store and forward mode
Dip4 ON = LFP Enable;
Dip4 Off= LFP Disable
LED indicators PWR1: ON=Power Connected
PWR2: ON= Power Connected
FL/A: ON=Fiber Connected; Active=Data Transmitting
TL/A: ON=Copper Connected; Active= Data Transmitting
100M: ON=100M Data Rate Transmitting
Power Input Voltage: 12~56 VDC, redundant power inputs
Power Consumption: <5W
Protection: Overload Current; Reverse Polarity
Connector: Terminal Block
Environment Operating Temperature: -40 ? C ~ +85 ? C
Storage Temperature: -40 ? C ~ +95 ? C
Relative humidity: 5-95% ( no condensation
Physical Characteristics Housing: IP40 Protection, Aluminum Alloy
Installation: DIN-Rail , Wall-Mounted
Dimension: 115*81*35mm
Weight: 0.30kg
EMS Standards
IEC61000-4-2(ESD): +8KV (Contact Discharge), +15KV (Contact Discharge
IEC61000-4-3(RS): 10V/M (80-1000MHZ
IEC61000-4-4(EFT): power cables +4KV, signal cables +2KV
IEC61000-4-5(Surge): power cables +4KV CM/+ 2KV DM, signal cables + 2KV
IEC61000-4-6(RF coupling): 3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ
IEC61000-4-8(Power Frequency Magnetic Field): 100A/M COUNT 1000A/M 1S TO 3S
IEC61000-4-12/18(Damped Oscillatory Wave): 2.5KV CM, 1KV DM
IEC61000-4-10(conducted disturbances): 30A/M
IEC61000-4-16(common mode): 30V COUNT 300V,1S
IEC61000-6-2(Electromagnetic compatibility
IEC61850-3(electrical substation
IEEE1613 (electric power substations
EN50121-4(Rail Traffic